When I first got my ATtiny2313 it took me the better part of 4 hours to finally get it programmed. I went through countless tutorials online that were old and outdated. I was never able to get the correct files from one website. I had to combine the files from several websites before I was finally able to program my ATtiny. NOTE: With the recent update of the Arduino IDE I can't figure out how to get the boards to show up in the list. I'm sure it's easy and I'll figure it out in a bit. For now you are still going to have to use the old version of arduino for programming any ATtiny chips.

High- Low Tech – Programming an ATtiny w/ Arduino 1. This tutorial shows you how to program an ATtiny. Download Program At90s2313 With Arduino Uno Datasheet. High- Low Tech – Programming an ATtiny w/ Arduino 1. This tutorial shows you how to program an ATtiny. 84 microcontroller using the. News in Weblog format, links, forum, tutorials. Download Program At90s2313 With Arduino Robot Programming. Download Program At90s2313 With Arduino Robot. How to Program a AVR (arduino). Ada avr tutorial. Burning the firmware: Unpack the USBTiny. Download Program At90s2313 With Arduino.

Java Jre 1.7 For Windows 7 64 Bit on this page. The goal of my (Current and Updated!!!) series is to find tutorials online that are old, outdated, or nonworking and make a new tutorial that I have tested and used myself. My first i'ble in this series is how to use I will keep updating my i'bles in this series to work with new Arduino boards, IDEs and the like. Now I've never tested this process on a windows but I know that it works on a mac. It should be the same for windows, just delete any mac content in the zip. First you need to download the boards information for the Arduino IDE. This file will need to be downloaded in order to program a ATtiny2313.

Once you have downloaded that you will need to extract the 'tiny' folder to your Arduino hardware folder. Now if you don't know where that is or if you don't have it here are the steps. • Go to your Arduino documents. This is where all the sketches are saved (by default).• For mac users it's Macintosh HD>Users>username>documents>Arduino.• Create a new folder and name it 'hardware', just like that. Into this folder you will put the 'tiny' folder that you downloaded.• For PC users Program Files(x86)=>Arduino=>hardware. Copy the 'tiny' folder into it and restart the Arduino IDE.Delete the extra mac content.

• First make sure that you have already uploaded the ArduinoISP to the Arduino. • Select the (ATtiny2313@1MHz) board. When you go to boards you will notice that you will have a lot more options to use. This is because that 'tiny' folder that we put in the 'hardware' folder gave the Arduino program more board options.

• Under 'programmer' select 'Arduino as ISP'. • Open the blink sketch and change the led pin 13 to pin 7. • Click the upload button and pray! Once you upload it you should have no errors. If you connected the Attiny to the Arduino incorrectly, it'll bring up the an error and it will say 'double check connections'. After upload your LED should start blinking!

You now know how to program your ATtiny2313. Troubleshooting: • LED does not blink Make sure that you have connected the LED to the proper pins.

Make sure that in the blink sketch you change the 13 to '7'. Replace the LED and try with another one. • Unable to program Make sure you have properly download, unzipped, and placed the 'tiny' folder.