This tutorial uses unsupported features of the IOMEGA Storcenter ix4-200d. It worked for me but use it at your own risk! It should work (again, it is unsupported) on the ix2 Storcenter as well.

Tutorial tested on IOMEGA Storcenter ix4-200d firmware 3.1.14.995 The aim of the tutorial is to be able to add programs to you NAS without having to go too deep in the system. This is also helpful to compile natively on the NAS without needing to cross compile for your architecture. SSH into your NAS See my other post: 2. Directory Structure on the NAS The Lifeline OS (Iomega's OS) does put most of the root file system in read only mode. It is not much use to try to put stuff there anyway because the partitition is very small You can type: df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 45548 12% / /dev/root.old 6613 2119 4494 33% /initrd none 45548 12% / /dev/md0_vg/BFDlv 41 16% /boot /dev/loop0 524 6953 99% /mnt/apps /dev/loop1 4959 2230 2473 48% /etc /dev/loop2 216 216 0 100% /oem tmpfs 255748 0 255748 0% /mnt/apps/lib/init/rw tmpfs 255748 0 255748 0% /dev/shm /dev/mapper/md0_vg-vol1 16774 20% /mnt/system /dev/mapper/2602b0ce_vg-lv43ec31bd 41% /mnt/pools/A/A0 to see the partitions and their mountpoint. Hp C 2004 Hpdc Motherboard Drivers. Download 32&64 Bit Version. The idea seems to be that third party programs should be installed in the /opt/ directory, which has ample storage (16GB) whereas root (/) only has 50MB. Use ipkg ipkg is intalled by default in the Iomega storcenter.